.TOHATSU BFT75

Opis

BFT75

MID RANGE

Tohatsu’s 75 hp Four Stroke is one of the lightest outboards in its class, weighing in at just 359 pounds. This in-line 4 cylinder is equipped with SOHC, or single overhead cam, to deliver excellent torque and power. The BFT 75hp also features a Optimized Fuel Injection system that delivers the precise amount of fuel/air to each cylinder. The result is an easy start and instant throttle response with superior fuel efficiency. Our 75 hp engine comes with a high output 44 amp alternator that produces nearly twice as many charging amps as some competitors.

The 75 hp four stroke is a great choice because it is our most advanced technology in a mid-range engine.

Tohatsu 75 hp 4-Stroke Benefits

  • High output 44 amp alternator that produces nearly twice as many charging amps as some competitors
  • Weighing in at only 359lbs makes the BFT75 one of the lightest motors in its class
  • In-line 4 cylinder SOHC, dual intake valves help deliver excellent torque and power
  • Double sealed multi-layered paint process to help protect against corrosion
  • Ultra-low 3 star CARB emission approved
  • 5 Year limited warranty

4-Stroke Technology

  • Dual stage induction for improved performance
  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • 3-way cooling system to help protect against overheating
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized fuel injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Start-in-gear protection
  • Over-rev. limiter

FEATURES

4-front Corrosion Protection System

A patented, “Double Sealed” multi-layered paint process, sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

SPECIFICATIONS

Engine (No. of Cylinder) 4 Cylinder SOHC
Output 75 hp (55.9 kw)
Displacement 1,496 cc (91.3 cu.in.)
Bore x Stroke 73 x 89 mm (2.9 x 3.5 in)
Starting Electric
Control Type Remote Control
Gear Shift Forward – Neutral – Reverse
Gear Ratio 2.33:1
Ignition System MicroComputer Programmed
Transom Height 20″
Fuel Unleaded Gasoline (87 Octane) or higher
Oil Type NMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity 1.24 gal. (4.4 L) w/filter
Weight* 364 lbs. (165 kg)
Alternator Output 12V, 420W, 44A
Max. RPM Range 5,000 – 6,000
Programmed Fuel Injection Standard
Digital CD Ignition System Standard
Start In Gear Protection Standard
Thermostat Controlled Cooling System Standard
Through-The-Prop Exhaust Standard
Overheat Buzzer Standard
Power Trim and Tilt Standard
Oil Pressure Warning Standard
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Specifications and descriptions are subject to change without notice.

Dodatne informacije

ZNAMKA

TOHATSU



Ekskluzivni izdelki

Posebna kategorija produktov